济南精华数控设备有限公司
【济南精华数控雕刻机】石材雕刻机_木材/墓碑/金属玉石专用雕刻机
全国客服热线:

0531-58566738

新闻中心

雕刻机主轴问题判断

  在雕刻加工过程中木匠开料机的雕刻主轴所承受的作业任务很重,作业频率很高,所以也是最简略出现问题的部位之一。一般来说,出现以下这几种动静是可以判别出问题的:

  一、淅沥淅沥的动静

  由坚持器与翻滚体振动、冲突发生,不管润滑脂种类怎样都能够发生,承受力矩、负荷或径向游隙大的时分更简略发生。

  解决方法:前进坚持器精度、选用游隙小的轴承或对轴承施加预负荷、下降力矩负荷,减少设备过失、选用好的油脂。

  二、嗡嗡的动静

  马达无负荷作业是宣告类似蜂鸣相同的动静,且马达发生轴向失常振动,开或关机时有嗡嗡声。

  解决方法:多呈现在润滑状况欠好,以及在冬天且两端用球轴承的马达,主要是轴调心功能欠好时,轴向振动影响下发生的一种不稳定的振动。

  三、杂质音

  由轴承或优质的清洁度导致,宣告一种不规则的失常音,动静时有时无,时大时小,在高速电机上发生频频

  解决方法:选用好的油脂、前进注脂前的清洁度、加强轴承的密封功能、前进设备环境的清洁度

  四、哒哒的动静

  动静频率随轴承转速而改动,零件表面波纹度是导致噪音的主要原因

  解决方法:改善轴承滚道表面加工质量,下降波纹度幅值、减少碰伤、修改游隙预紧力和协作,检查安闲端轴承的作业,改善轴与轴承座的精度设备方法。

  这就是木匠开料机在加工过程中通常会发出来的一些动静,关于这些不同的动静,我们要做出正确的判别,然后依据问题而加以解决,终究到达抱负的加工效果

  In carving process, carpenter's cutting machine's main task is very heavy and the operation frequency is very high, so it's also one of the most simple problems. Generally speaking, the following problems can be identified as follows:

  A movement, patter

  The vibration and conflict of the attachment and tumbling body can happen regardless of the type of grease. It can happen more easily, and it will take more time to bear the moment, load or radial clearance.

  The way to solve this problem is to advance the precision of the stick, select the bearing with small clearance or load the load on the bearing, and reduce the torque load, so as to reduce the equipment fault and the grease selected.

  Two, buzzing

  The motor load free operation is the same as the bee sounding, and the motor has an axially abnormal vibration, and there is a buzzing sound when opening or closing the machine.

  The way of solution is that the unstable vibration occurs mostly when the motor is lubricated and the ball bearings are used at both ends of the winter, which is mainly influenced by axial vibration.

  Three. The sound of impurity

  It is caused by the cleanliness of the bearing or high quality, announces an irregular sound of aberration, which is sometimes no, when it is small, and occurs frequently on the high speed motor.

  The solution: select good grease, advance the cleanliness, strengthen the sealing function of the bearing, and the cleanliness of the advance equipment environment

  Four, Dada movement

  The dynamic and static frequency changes with the bearing speed, and the surface ripple of the part is the main cause of noise.

  The solution is to improve the processing quality of bearing raceway surface, reduce the amplitude of corrugation, reduce the bruise, modify the clearance and preload and cooperate, check the operation of the idle end bearing, and improve the accuracy and equipment of shaft and bearing seat.

  This is the movement of a carpenter's opening machine during the processing. For these different movements, we should make the correct judgement and solve it according to the problem, and finally achieve the desired processing effect.

联系我们

联系人:吴经理

手 机:13791100065

电 话:0531-58566738

邮 箱:2789920644@qq.com

公 司:济南精华数控设备有限公司

地 址:山东省·济南市